top of page

Technical guides and insights
The TKS RaceLab technical blog on kart maintenance, engines and setup


Rotax test day and kart track day in Italy: a complete guide for drivers from abroad
Rotax test day and kart track day in Italy for drivers from abroad: 2026 Maranello race kart, Rotax engine, Alfano 7 telemetry and a dedicated technician, prices, tracks, airports and booking.

Sergio, TKS RaceLab
Nov 84 min read


How to install a Rotax engine on a kart chassis: step-by-step guide and torques
To install a Rotax engine on a kart chassis you bolt the engine plate under the engine, fix the clamps to the chassis tubes with abrasive paper underneath, fit the chain with about 5 mm of play and align the sprockets with a straight edge.

Sergio, TKS RaceLab
Oct 229 min read


Rotax Global App: how to use it on a race weekend
The Rotax Global App is the free app for iPhone and Android used at Rotax races that run on the EVA event management system.

Sergio, TKS RaceLab
Oct 226 min read


Rotax engine exploded view: how to find the right spare part number
The Rotax engine exploded view is the illustrated parts catalogue: for each engine group there is a drawing with numbered parts and, below it, a table with position, part number, description and quantity for each category.

Sergio, TKS RaceLab
Oct 227 min read


Kart track logbook: what to write down every session (free PDF)
The track logbook is the technical diary of your kart: for every day you write down track conditions, starting set-up, what you changed in every session with lap time and feel, and the engine hours.

Sergio, TKS RaceLab
Oct 225 min read


Rotax Grand Finals 2027 in Chile: how to qualify and when they are held
The Rotax MAX Challenge Grand Finals are the world final of the Rotax one-make series. In 2026 they are held in Portimão, Portugal, at the Kartódromo Internacional do Algarve, from 7 to 14 November. You do not enter: you qualify.

Sergio, TKS RaceLab
Oct 225 min read


Rotax technical scrutineering: what the scrutineers check in 2026
At Rotax technical scrutineering the engine is presented sealed, with the seal intact and the engine identity card stamped.

Sergio, TKS RaceLab
Oct 226 min read


Rotax reed valve: check, reeds and Micro and Mini kit
The Rotax reed valve is the valve that lets the mixture into the crankcase and stops it from flowing back towards the carburettor.

Sergio, TKS RaceLab
Oct 225 min read


Rotax crankshaft: when to rebuild it and which measurements to check
The Rotax crankshaft is checked at every engine rebuild, which on the 125 MAX evo and the DD2 is due every 50 running hours.

Sergio, TKS RaceLab
Oct 226 min read


How to Measure Squish on Rotax Engines: Procedure and 2026 Minimum Values
How to measure squish on Rotax engines with the official 2026 data: what it is, the minimum values for Micro, Mini, Junior, Senior and DD2, the solder and calliper procedure and how to correct it with base gaskets.

Sergio, TKS RaceLab
Oct 217 min read


Rotax electric kart E10 and E20: classes, power, battery and where to race
The Rotax electric kart explained simply: E10 Bambini and E10 Mini for young drivers, E20 Junior, Senior and Masters for racing. Power, battery, charging, tyres, classes and where to race.

Sergio, TKS RaceLab
Oct 2010 min read


Rotax TRAX: how Rotax kart telemetry, the app and the Driver Score work
Rotax TRAX explained simply: what the device measures, what the free and Pro app do, Driver Score, Rotax Coach, how to mount it on the kart and what it costs.

Sergio, TKS RaceLab
Oct 206 min read


Rotax MAX Torque Settings: The Complete Table for the 125 MAX evo Engine
Rotax MAX torque settings: all the values of the Rotax 125 MAX evo 2024 repair manual for cylinder, head, exhaust valve, intake, crankcase, clutch and starter.

Sergio, TKS RaceLab
Oct 205 min read


Rotax Junior vs Senior MAX evo: Technical Differences and When to Move Up to Senior
Rotax Junior vs Senior MAX evo: power, torque, cylinder with and without exhaust valve, ECU, squish, age and licence, with the full table of differences.

Sergio, TKS RaceLab
Oct 205 min read


Rotax Conversion Kit from Junior to Senior MAX evo: What You Need, Cost and Who Fits It
Rotax conversion kit 281377: all the parts to move from Junior to Senior MAX evo, the ECU to buy separately, the costs and who must fit it.

Sergio, TKS RaceLab
Oct 205 min read


Rotax Plasma Cylinder 2027: What Changes, Who Needs It and Recommended Jetting
Rotax Plasma cylinder and new Rotax piston: what changes, who must fit it from 2027, how it is installed on Junior and Senior and how to set the jetting.

Sergio, TKS RaceLab
Oct 207 min read


Overtaking in karting: how to pass and how to defend your position
Overtaking in karting: how to set it up, the three moves to pass, how to defend your position without losing time and the rules to know in a race.

Sergio, TKS RaceLab
Oct 184 min read


Karting rolling starts: rules and technique for holding your position
Rolling start in karting: how the formation lap works, the start corridor rules, the penalties and how to prepare the start without mistakes.

Sergio, TKS RaceLab
Oct 184 min read


New tyres in qualifying on the Rotax: rules and how to use them
New tyres in qualifying on the Rotax: why the qualifying set is the final set, the Mojo tyres for each class, the rules and how to make the most of them.

Sergio, TKS RaceLab
Oct 184 min read


Kart cleaning: how to wash your kart after the track and what to check
Kart cleaning step by step: cold engine, intake sealed, air filter, radiator, brakes, lubrication after washing and the checks to do while you clean.

Sergio, TKS RaceLab
Oct 185 min read
bottom of page
